View IRS21094PBF_716757.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheet No. PD60261
IRS2109/IRS21094(S)PbF
Features
HALF-BRIDGE DRIVER
Product Summary
VOFFSET IO+/VOUT ton/off (typ.) Deadtime 600 V max. 120 mA / 250 mA 10 V - 20 V 750 ns & 200 ns 540 ns
* Floating channel designed for bootstrap operation * Fully operational to +600 V * Tolerant to negative transient voltage, dV/dt * Gate drive supply range from 10 V to 20 V * Undervoltage lockout for both channels * 3.3 V, 5 V, and 15 V input logic compatible * Cross-conduction prevention logic * Matched propagation delay for both channels * High-side output in phase with IN input * Logic and power ground +/- 5 V offset. * Internal 540 ns deadtime, and programmable
immune
up to 5 s with one external RDT resistor (IRS21094) * Lower di/dt gate driver for better noise immunity * Shutdown input turns off both channels. * RoHS compliant
(programmable up to 5 s for IRS21094)
Packages
Description
The IRS2109/IRS21094 are high voltage, high speed power MOSFET and IGBT drivers with dependent high- and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the highside configuration which operates up to 600 V.
8 Lead SOIC 14 Lead SOIC
14 Lead PDIP 8 Lead PDIP
Typical Connection
V CC
up to 600 V
V CC
IN SD
VB HO VS LO
TO LOAD
IN SD COM
up to 600 V
IRS21094
HO
IRS2109
VCC IN SD
VCC IN SD DT
VB VS TO LOAD
(Refer to Lead Assignments for correct configuration). These diagrams show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout.
V SS
RDT
VSS
COM LO
www.irf.com
1
IRS2109/IRS21094(S)PbF
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Symbol
VB VS VHO VCC VLO DT VIN VSS dVS/dt
Definition
High-side floating absolute voltage High-side floating supply offset voltage High-side floating output voltage Low-side and logic fixed supply voltage Low-side output voltage Programmable deadtime pin voltage (IRS21094 only) Logic input voltage (IN & SD) Logic ground (IRS21094/IRS21894 only) Allowable offset supply voltage transient (8 Lead PDIP) (8 Lead SOIC) (14 lead PDIP) (14 lead SOIC) (8 Lead PDIP) (8 Lead SOIC) (14 lead PDIP) (14 lead SOIC)
Min.
-0.3 VB - 25 VS - 0.3 -0.3 -0.3 VSS - 0.3 VSS - 0.3 VCC - 25 -- -- -- -- -- -- -- -- -- -- -50 --
Max.
625 VB + 0.3 VB + 0.3 25 VCC + 0.3 VCC + 0.3 VCC + 0.3 VCC + 0.3 50 1.0 0.625 1.6 1.0 125 200 75 120 150 150 300
Units
V
V/ns
PD
Package power dissipation @ TA +25 C
W
RthJA
Thermal resistance, junction to ambient
C/W
TJ TS TL
Junction temperature Storage temperature Lead temperature (soldering, 10 seconds)
C
www.irf.com
2
IRS2109/IRS21094(S)PbF
Recommended Operating Conditions
The input/output logic timing diagram is shown in Fig. 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at a 15 V differential.
Symbol
VB VS VHO VCC VLO VIN DT VSS TA
Definition
High-side floating supply absolute voltage High-side floating supply offset voltage High-side floating output voltage Low-side and logic fixed supply voltage Low-side output voltage Logic input voltage (IN & SD) Programmable deadtime pin voltage (IRS21094 only) Logic ground (IRS21094 only) Ambient temperature
Min.
VS + 10 (Note 1) VS 10 0 VSS
Max.
VS + 20 600 VB 20 VCC VCC VCC 5 125
Units
V
VSS
-5 -40
C
Note 1: Logic operational for VS of -5 V to +600 V. Logic state held for VS of -5 V to -VBS. (Please refer to the Design Tip DT97-3 for more details).
Dynamic Electrical Characteristics
VBIAS (VCC, VBS) = 15 V, VSS = COM, C L = 1000 pF, TA = 25 C, DT = VSS unless otherwise specified.
Symbol
ton toff tsd MT tr tf DT
Definition
Turn-on propagation delay Turn-off propagation delay Shutdown propagation delay Delay matching, HS & LS turn-on/off Turn-on rise time Turn-off fall time Deadtime: LO turn-off to HO turn-on(DTLO-HO) & HO turn-off to LO turn-on (DTHO-LO )
Min.
-- -- -- -- -- -- 400 4 -- --
Typ.
750 200 2 00 0 100 35 540 5 0 0
Max. Units Test Conditions
950 280 280 70 220 80 680 6 60 600 s ns ns VS = 0 V RDT= 0 R DT = 200 k (IR21094) RDT= 0 RDT = 200 k (IR21094) VS = 0 V VS = 0 V or 600 V
MDT
Deadtime matching = DTLO - HO - DTHO-LO
www.irf.com
3
IRS2109/IRS21094(S)PbF
Static Electrical Characteristics
VBIAS (VCC, VBS) = 15 V, VSS = COM, DT= VSS and TA = 25 C unless otherwise specified. The VIL, VIH, and IIN parameters are referenced to VSS /COM and are applicable to the respective input leads: IN and SD. The VO, IO, and Ron parameters are referenced to COM and are applicable to the respective output leads: HO and LO.
Symbol
VIH VIL VSD,TH+ VSD,THVOH VOL ILK IQBS IQCC IIN+ IINVCCUV+ VBSUV+ VCCUVVBSUVVCCUVH VBSUVH IO+ IO-
Definition
Logic "1" input voltage for HO & logic "0" for LO Logic "0" input voltage for HO & logic "1" for LO SD input positive going threshold SD input negative going threshold High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Logic "1" input bias current Logic "0" input bias current VCC and VBS supply undervoltage positive going threshold VCC and VBS supply undervoltage negative going threshold Hysteresis Output high short circuit pulsed current Output low short circuit pulsed current
Min. Typ. Max. Units Test Conditions
2.5 -- 2.5 -- -- -- -- 20 0.4 -- -- 8.0 7.4 0.3 120 250 -- -- -- -- 0.05 0.02 -- 75 1.0 5 -- 8.9 8.2 0.7 290 600 -- 0.8 -- 0.8 0.2 0.1 50 130 1.6 20 2 9.8 9.0 -- -- -- mA VO = 0 V, PW 10 s VO = 15 V,PW 10 s A A mA V IO = 2 mA VB = VS = 600 V VIN = 0 V or 5 V VIN = 0 V or 5 V RDT = 0 IN = 5 V, SD = 0 V IN = 0 V, SD = 5 V VCC = 10 V to 20 V
V
www.irf.com
4
IRS2109/IRS21094(S)PbF
Functional Block Diagrams
VB
IRS2109
IN
VSS/COM LEVEL SHIFT HV LEVEL SHIFTER PULSE GENERATOR
UV DETECT R PULSE FILTER R S Q
HO
VS
DEADTIME UV DETECT
VCC
+5V
LO
SD
VSS/COM LEVEL SHIFT
DELAY
COM
VB
IRS21094
IN
VSS/CO M LEVEL SHIFT HV LEVEL SHIFTER PULSE GENERATOR
UV DETECT R PULSE FILTER R S Q
HO
VS
DT
+5V
DEAD TIM E UV DETECT
VCC
LO
SD
VSS/CO M LEVEL SHIFT
DELAY
CO M
VSS
www.irf.com
5
IRS2109/IRS21094(S)PbF
Lead Definitions
Symbol Description
IN SD DT VSS VB HO VS VCC LO COM Logic input for high-side and low-side gate driver outputs (HO and LO), in phase with HO (referenced to COM for IRS2109 and VSS for IRS21094) Logic input for shutdown (referenced to COM for IRS2109 and VSS for IRS21094) Programmable deadtime lead, referenced to VSS. (IRS21094 only) Logic ground (IRS21094 only) High-side floating supply High-side gate drive output High-side floating supply return Low-side and logic fixed supply Low-side gate drive output Low-side return
Lead Assignments
1 2 3 4 VCC IN SD COM VB HO VS LO
8
7 6 5
1 2 3 4
VCC IN SD COM
VB HO VS LO
8
7 6 5
8 Lead PDIP
8 Lead SOIC
IRS2109PbF
IRS2109SPbF
1 2 3 4 5 6 7
VCC IN SD DT VSS COM LO VB HO VS
14
13 12 11 10 9 8
1 2 3 4 5 6 7
VCC IN SD DT VSS COM LO VB HO VS
14
13 12 11 10 9 8
14 Lead PDIP
14 Lead SOIC
IRS21094PBF
www.irf.com
IRS21094SPbF
6
IRS2109/IRS21094(S)PbF
IN
IN(LO)
50% 50%
SD
IN(HO)
ton tr 90% toff 90% tf
HO LO
LO HO
Figure 1. Input/Output Timing Diagram
10%
10%
Figure 2. Switching Time Waveform Definitions
50%
50%
IN
SD
50%
90%
tsd
HO
90%
DT LO-HO
10% DT HO-LO
HO LO
LO
90%
10% MDT= DT LO-HO - DT HO-LO
Figure 3. Shutdown Waveform Definitions
Figure 4. Deadtime Waveform Definitions
IN(LO)
50% 50%
IN (HO)
LO
HO
10%
MT 90%
MT
LO
HO
Figure 5. Delay Matching Waveform Definitions
www.irf.com
7
IRS2109/IRS21094(S)PbF
1300
1300
Turn-On Propagation Delay (ns)
Turn-On Propagation Delay (ns)
1100
1100 M ax.
900
M ax
900 Typ.
700
Typ.
700
500 50
500 25 0 25 50 75 100 125 10 12 14 16 18 20
Temperature (oC)
Figure 6A. Turn-On Propagation Delay vs. Temperature
VBIAS Supply Voltage (V)
Figure 6B. Turn-On Propagation Delay vs. Supply Voltage
500
500
Turn-Off Propagation Delay (ns)
Turn-Off Propagation Delay (ns)
400
400
M ax. 300 Typ. 200
300 M ax. 200 Typ. 100
100
0 50 25 0 25 50
o
0 75 100 125 10 12 14 16 18 20
Temperature ( C)
Figure 7A. Turn-Off Propagation Delay vs. Temperature
V BIAS Supply Voltage (V)
Figure 7B. Turn-Off Propagation Delay vs. Supply Voltage
www.irf.com
8
IRS2109/IRS21094(S)PbF
500
500
SD Propagation Delay (ns)
400
SD Propagation Delay (ns)
400 M ax. 300 Typ. 200
300 M ax. 200 Typ. 100
100
0 50 25 0 25 50
o
0 75 100 125 10 12 14 16 18 20
Temperature ( C)
Figure 8A. SD Propagation Delay vs. Temperature
V BIAS Supply Voltage (V)
Figure 8B. SD Propagation Delay vs. Supply Voltage
5 00 T urn-O n Rise i e (ns ) s m Turn-On R i e TTime (ns) 4 00 3 00 2 00
Max.
50 0
Turn-Onn Rise T i e (ns ) T urn-O R i e Time (ns) s m
40 0 30 0
Max.
20 0
Typ.
1 00
Typ.
10 0 0
0 -5 0 -2 5 0 25 50 75 1 00 1 25 Temperature(oC)
Figure 9A. Turn-On Rise Time vs. Temperature
10
12
14
16
18
20
VBIAS Supply Voltage (V)
Figure 9B. Turn-On Rise Time vs. Supply Voltage
www.irf.com
9
IRS2109/IRS21094(S)PbF
2 00
Turn-Off Fall Time (ns)
200 T u Fall Time i e lm Turn-Off rn -O ff F al T(ns)
1 50 1 00
Max.
150 100
Max.
50
Typ.
50
Typ.
0 -5 0 -2 5 0 25 50 75 1 00 1 25
Temperature(oC)
Figure 10A. Turn-Off Fall Time vs. Temperature
0 10 12 14 16 18 20 Input Voltage (V)
Figure 10B. Turn-Off Fall Time vs. Supply Voltage
1000
1000
800
800 M ax.
Deadtime (ns)
Deadtime (ns)
M ax.
600 Typ. Mi n.
600
Typ.
Mi n. 400
400
200 50 25 0 25 50
o
200 75 100 125 10 12 14 16 18 20
Temperature ( C)
V BIAS Supply Voltage (V)
Figure 11B. Deadtime vs. Supply Voltage
Figure 11A. Deadtime vs. Temperature
www.irf.com
10
IRS2109/IRS21094(S)PbF
7 6
5 Input Voltage (V)
M ax.
Deadtime ( Deadtime (s)s)
5 Typ. 4 3 2 1 0 0 50 100 150 200 M in.
4 3
Min.
2 1 -50
-25
0
25
50
75
100
125
RDT (K) RDT (k) Figure 11C. Deadtime vs. R DT (IR21094 only)
Tem perature (oC )
Figure 12A. Logic "1" Input Voltage vs. Temperature
5
Logic "0" Input Bias Current (A)
6 5 4 3 2 1 0 -50 Max
Input Voltage (V)
4 3
Min.
2 1 10 12 14 16 18 20 VBIAS Supply Voltage (V)
Figure 12B. Logic "1" Input Voltage vs. Supply Voltage
-25
0
25
50
75
100
125
Temperature (C)
Figure 13A. Logic "0" Input Bias Current vs. Temperature
www.irf.com
11
IRS2109/IRS21094(S)PbF
Logic "0" Input Bias Current (A)
6 5 4 3 2 1 0 10 12 14 16 18 20 Supply Voltage (V)
Figure 13B. Logic "0" Input Bias Current vs. Voltage
5
Max
SD Input threshold (+) (V)
4 3 Max. 2 1 0 -50
-25
0
25
50
o
75
100
125
Temperature ( C)
Figure 14A. SD Input Positive Going Threshold (+) vs. Temperature
5 4 3 2 1 0 10 12 14 16 18 20
Max.
5
SD Negative Going Threshold (V)
SD Input threshold (+) (V)
4
3
2
1
M in.
0 -50 -25 0 25 50
o
75
100
125
VCC Supply Voltage (V)
Figure 14B. SD Input Positive Going Threshold (+) vs. Supply Voltage
Temperature ( C)
Figure 15A. SD Negative Going Threshold vs. Temperature
www.irf.com
12
IRS2109/IRS21094(S)PbF
5
SD Negative Going Threshold (V)
High Level Output Voltage (V)
0.5 0.4 0.3 0.2 0.1
Typ.
4
3
2
Max.
1
Mi n.
0 10 12 14 16 18 20
0.0 -50
-25
0
25
50
75
100
125
V CC Supply Voltage (V)
Figure 15B. SD Negative Going Threshold vs. Supply Voltage
Temperature (oC)
Figure 16A. High Level Output Voltage vs. Temperature
High Level Output Voltage (V)
0.4 0.3 0.2 0.1
Typ.
Low Level Output Voltage (V)
0.5
0.5 0.4 0.3 0.2 0.1
Max. Typ.
Max.
0.0 10 12 14 16 18 20 VBIAS Supply Voltage (V)
Figure 16B. High Level Output Voltage vs. Supply Voltage
0.0 -50
-25
0
25
50
75
100
125
Temperature (oC)
Figure 17A. Low Level Output Voltage vs. Temperature
www.irf.com
13
IRS2109/IRS21094(S)PbF
0.4 0.3 0.2
Max.
Offset Supply Leakage Current (A) Offset Supply Leakage Current ( A)
Low Level Output Voltage (V)
0.5
500
400
300
200
0.1
Typ.
100 M ax. 0 50 25 0 25 50
o
0 10 12 14 16 18 20 VBIAS Supply Voltage (V)
Figure 17B. Low Level Output Voltage vs. Supply Voltage
75
100
125
Temperature ( C)
Figure 18A. Offset Supply Leakage Current vs. Temperature
OOffset S u p p l LLeakageCCurrent( (A)) ffs e t Supply e a ka g e u rre n t y A
500
400
400
V BS S u p p l u rre n t A ) y VBS Supply CCurrent((A)
300
300
200
200
M ax. 100 Typ. Mi n.
100 M ax.
0 0 100 200 300 400 500 600
0 50 25 0 25 50 75 100 125
VB Boost Voltage (V)
Temperature (oC)
Figure 18B. Offset Supply Leakage Current vs. Boost Voltage
Figure 19A. VBS Supply Current vs. Temperature
www.irf.com
14
IRS2109/IRS21094(S)PbF
400
3. 0
VBS Supply Current (A)
2. 5
300
VCC Supply Current (mA)
2. 0 M ax. 1. 5 Typ. 1. 0 Mi n. 0. 5
200
M ax. 100 Typ. Mi n. 0 10 12 14 16 18 20
0. 0 50 25 0 25 50 75 100 125
VBS Supply Voltage (V) Figure 19B. VBS Supply Current vs. Supply Voltage
Temperature (oC) Figure 20A. V CC Supply Current vs. Temperature
3. 0
60
V CC Supply Current (mA)
2. 5
Logic "1" Input Current (A )
12 14 16 18 20
50
2. 0
40
1. 5 M ax. 1. 0 Typ. 0. 5 Mi n. 0. 0 10
30
20 M ax. Typ. 0 50 25 0 25 50 75 100 125
10
V CC Supply Voltage (V)
Temperature ( oC)
Figure 20B. VCC Supply Current vs. VCC Supply Voltage
Figure 21A. Logic "1" Input Current vs. Temperature
www.irf.com
15
IRS2109/IRS21094(S)PbF
60
5
Logic "1" Input Logic "1" Input Current ( A) (A)
50
Logic 0" Input Current (A) "0" Input Current ( A)
12 14 16 18 20
4
40
3 M ax. 2
30 M ax. 20
10 Typ. 0 10
1
0 50 25 0 25 50
o
75
100
125
V CC Supply Voltage (V)
Figure 21B. Logic "1" Input Current vs. Supply Voltage
Temperature ( C)
Figure 22A. Logic "0" Input Current vs. Temperature
5
12
V CC UVLO Threshold (+) (V)
Logic "0" Input Current ((A) Logic 0" Current A)
4
11
3 M ax. 2
10
M ax.
9
Typ.
Mi n. 8
1
0 10 12 14 16 18 20
7 50 25 0 25 50
o
75
100
125
V CC Supply Voltage (V)
Figure 22B. Logic "0" Input Currentt vs. Supply Voltage
Temperature ( C)
Figure 23. VCC Undervoltage Threshold (+) vs. Temperature
www.irf.com
16
IRS2109/IRS21094(S)PbF
11
12
V CC UVLO Threshold (-) (V)
V BS UVLO Threshold (+) (V)
0 25 50 75 100 125
10 M ax. 9 Typ. 8 Mi n. 7
11
10
M ax.
Typ. 9 Mi n. 8
6 50 25
7 50 25 0 25 50 75 100 125
Temperature ( oC)
Figure 24. V CC Undervoltage Threshold (-) vs. Temperature
Temperature ( oC)
Figure 25. VBS Undervoltage Threshold (+) vs. Temperature
11
500
V BS UVLO Threshold (-) (V)
Output Source Current (mA)
10
400
Typ.
300
M ax. 9 Typ. 8 Mi n. 7
200
Min.
100
6 50 25 0 25 50 75 100 125
0 -50 -25 0 25 50 75 100 125
Temperature (oC)
Figure 26. V BS Undervoltage Threshold (-) vs. Temperature
Temperature (oC) Figure 27A. Output Source Current vs. Temperature
www.irf.com
17
IRS2109/IRS21094(S)PbF
500
Output Source Current (m Output SourceCurrent (A) ) Output Sink Current (m Output Sink Current (A) )
1000 800 600 400
Min. Typ.
400 300 200
Typ.
100
Min.
200 0 -50
0 10 12 14 16 18 20 VBIAS Supply Voltage (V)
Figure 27B. Output Source Current vs. Supply Voltage
-25
0
25
50
75
100
125
Temperature (oC)
Figure 28A. Output Sink Current vs. Temperature
1000
V S Offset Supply Voltage (V)
0
Output SinkCurrent (A) ) Output Sink Current (m
800 600 400
Typ.
-2 Typ. -4
-6
200
Min.
-8
0 10 12 14 16 18 20 VBIAS Supply Voltage (V)
Figure 28B. Output Sink Currentt vs. Supply Voltage
-10 10 12 14 16 18 20
V BS Flouting Supply Voltage (V)
Figure 29. Maximum V S Negative Offset vs. Supply Voltage
www.irf.com
18
IRS2109/IRS21094(S)PbF
140 Temperature (oC) 120 100 80 60 40 20 1 10 100 1000 Frequency (kHz)
Figure 30. IRS2109 vs Frequency (IRFBC20) Rgate = 33 , VCC = 15 V
140 V 70 V 0V
140 120 Temperature (oC) 100
140 V
80
70 V
60 40 20 1 10 100
0V
1000
Frequency (kHz)
Figure 31. IRS2109 vs Frequency (IRFBC30) Rgate = 22 , VCC = 15 V
140 120 Temperature ( oC) 100 80 60 40 20 1 10 100 1000 Frequency (kHz) Temperature (oC)
140 V 70 V 0V
140 120 100 80 60 40 20 1 10 100
140 V 70 V 0V
1000
Frequency (kHz)
Figure 32. IRS2109 vs Frequency (IRFBC40) Rgate = 15 , VCC = 15 V
Figure 33. IRS2109 vs Frequency (IRFPE50) Rgate = 10 , VCC = 15 V
www.irf.com
19
IRS2109/IRS21094(S)PbF
140 120 Temperature (oC) 100 80 60 40
0V 140 V 70 V
140 120 Temperature (oC) 100 80
140 V
60 40 20
70 V 0V
20 1 10 100 1000 Frequency (kHz) Figure 34. IRS21094 vs. Frequency (IRFBC20), Rgate=33 , V CC=15 V
1
10
100
1000
Frequency (kHz) Figure 35. IRS21094 vs. Frequency (IRFBC30), Rgate=22 , V CC=15 V
140 120 Temperature (oC)
o Temperature ( C)
140 120 100 80 60 40 20 1 10 100 1000 1 10 100
140 V
70 V
100
140 V
0V
80 60 40 20 Frequency (kHz)
70 V 0V
1000
Frequency (kHz) Figure 37. IRS21094 vs. Frequency (IRFPE50), Rgate=10 , V CC=15 V
Figure 36. IRS21094 vs. Frequency (IRFBC40), Rgate=15 , VCC=15 V
www.irf.com
20
IRS2109/IRS21094(S)PbF
140 120 Temperature (oC) 100 80 60 40 20 1 10 100 1000 Frequency (kHz) Figure 38. IRS2109S vs. Frequency (IRFBC20), Rgate=33 , V CC=15 V
140 V 70 V 0V
140 120
140 V
Temperature (oC)
100 80 60 40 20 1 10 100
70 V 0V
1000
Frequency (kHz) Figure 39. IRS2109S vs. Frequency (IRFBC30), Rgate=22 , V CC=15 V
140 120 Temperature (oC)
140 V 70 V
140 120
140 V 70 V 0 V
0V
Tempreture (oC)
100 80 60 40 20 1 10 100 1000 Frequency (kHz) Figure 40. IRS2109S vs. Frequency (IRFBC40), Rgate=15 , V CC=15 V
100 80 60 40 20 1 10 100 1000 Frequency (kHz) Figure 41. IRS2109S vs. Frequency (IRFPE50), Rgate=10 , V CC=15 V
www.irf.com
21
IRS2109/IRS21094(S)PbF
140 120 Temperature (oC) Temperature (oC) 100 80 60 40 20 1 10 100 1000 Frequency (kHz)
Figure 42. IRS21094S vs. Frequency (IRFBC20), Rgate=33 , Vcc=15 V
140 V 70 V 0V
140 120 100 80 60 40 20 1 10 100 1000 Frequency (kHz)
Figure 43. IRS21094S vs. Frequency (IRFBC30), Rgate=22 , Vcc=15 V
140 V 70 V 0V
140 120
o Temperature ( C)
140 120 Temperature (oC) 100 80 60 40
140 V 70 V 0V
140 V 70 V 0V
100 80 60 40
20
20 1 10 100 1000 Frequency (kHz)
Figure 44. IRS21094S vs. Frequency (IRFBC40), Rgate=15 , Vcc=15 V Figure 45. IRS21094S vs. Frequency (IRFPE50), Rgate=10 , Vcc=15 V
1
10
100
1000
Frequency (kHz)
www.irf.com
22
IRS2109/IRS21094(S)PbF
Case Outlines
8 Lead PDIP
01-6014 01-3003 01 (MS-001AB)
D A 5
B
FOOTPRINT 8X 0.72 [.028]
DIM A b c D
INCHES MIN .0532 .013 .0075 .189 .1497 MAX .0688 .0098 .020 .0098 .1968 .1574
MILLIMETERS MIN 1.35 0.10 0.33 0.19 4.80 3.80 MAX 1.75 0.25 0.51 0.25 5.00 4.00
A1 .0040
6 E
8
7
6
5 H 0.25 [.010] A
E
6.46 [.255]
1
2
3
4
e e1 H K L
8X 1.78 [.070]
.050 BASIC .025 BASIC .2284 .0099 .016 0 .2440 .0196 .050 8
1.27 BASIC 0.635 BASIC 5.80 0.25 0.40 0 6.20 0.50 1.27 8
6X
e e1
3X 1.27 [.050]
y
A C 0.10 [.004] y
K x 45
8X b 0.25 [.010]
NOTES:
A1 CAB
8X L 7
8X c
1. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. 2. CONTROLLING DIMENSION: MILLIMETER 3. DIMENSIONS ARE SHOWN IN MILLIMETERS [INC HES]. 4. OUTLINE CONFORMS TO JEDEC OUTLINE MS-012AA.
5 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED 0.15 [.006]. 6 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED 0.25 [.010]. 7 DIMENSION IS THE LENG TH OF LEAD FOR SOLDERING TO A SUBSTRATE.
8 Lead SOIC
www.irf.com
01-6027 01-0021 11 (MS-012AA)
23
IRS2109/IRS21094(S)PbF
14 Lead PDIP
01-6010 01-3002 03 (MS-001AC)
14 Lead SOIC (narrow body)
01-6019 01-3063 00 (MS-012AB)
www.irf.com
24
IRS2109/IRS21094(S)PbF
Tape & Reel 8-lead SOIC
LOAD ED TA PE FEED DIRECTION
B
A
H
D F C
N OTE : CO NTROLLING D IMENSION IN M M
E G
C A R R I E R T A P E D IM E N S I O N F O R 8 S O I C N M etr ic Im p e r i a l Cod e M in M ax M in M ax A 7 .9 0 8 .1 0 0 . 31 1 0 .3 1 8 B 3 .9 0 4 .1 0 0 . 15 3 0 .1 6 1 C 1 1 .7 0 1 2.30 0 .4 6 0 .4 8 4 D 5 .4 5 5 .5 5 0 . 21 4 0 .2 1 8 E 6 .3 0 6 .5 0 0 . 24 8 0 .2 5 5 F 5 .1 0 5 .3 0 0 . 20 0 0 .2 0 8 G 1 .5 0 n/ a 0 . 05 9 n/ a H 1 .5 0 1 .6 0 0 . 05 9 0 .0 6 2
F
D C E B A
G
H
R E E L D IM E N S I O N S F O R 8 S O IC N M etr ic Im p e r i a l Cod e M in M ax M in M ax A 3 2 9. 6 0 3 3 0 .2 5 1 2 .9 7 6 1 3 .0 0 1 B 2 0 .9 5 2 1.45 0 . 82 4 0 .8 4 4 C 1 2 .8 0 1 3.20 0 . 50 3 0 .5 1 9 D 1 .9 5 2 .4 5 0 . 76 7 0 .0 9 6 E 9 8 .0 0 1 0 2 .0 0 3 . 85 8 4 .0 1 5 F n /a 1 8.40 n /a 0 .7 2 4 G 1 4 .5 0 1 7.10 0 . 57 0 0 .6 7 3 H 1 2 .4 0 1 4.40 0 . 48 8 0 .5 6 6
www.irf.com
25
IRS2109/IRS21094(S)PbF
Tape & Reel 14-lead SOIC
LOAD ED TA PE FEED DIRECTION
B
A
H
D F C
N OTE : CO NTROLLING D IMENSION IN M M
E G
C A R R I E R T A P E D IM E N S I O N F O R 1 4 S O IC N M etr ic Im p e r i a l Cod e M in M ax M in M ax A 7 .9 0 8 .1 0 0 . 31 1 0 .3 1 8 B 3 .9 0 4 .1 0 0 . 15 3 0 .1 6 1 C 1 5 .7 0 1 6.30 0 . 61 8 0 .6 4 1 D 7 .4 0 7 .6 0 0 . 29 1 0 .2 9 9 E 6 .4 0 6 .6 0 0 . 25 2 0 .2 6 0 F 9 .4 0 9 .6 0 0 . 37 0 0 .3 7 8 G 1 .5 0 n/ a 0 . 05 9 n/ a H 1 .5 0 1 .6 0 0 . 05 9 0 .0 6 2
F
D C E B A
G
H
R E E L D IM E N S I O N S F O R 1 4 S O IC N M etr ic Im p e r i a l Cod e M in M ax M in M ax A 3 2 9. 6 0 3 3 0 .2 5 1 2 .9 7 6 1 3 .0 0 1 B 2 0 .9 5 2 1.45 0 . 82 4 0 .8 4 4 C 1 2 .8 0 1 3.20 0 . 50 3 0 .5 1 9 D 1 .9 5 2 .4 5 0 . 76 7 0 .0 9 6 E 9 8 .0 0 1 0 2 .0 0 3 . 85 8 4 .0 1 5 F n /a 2 2.40 n /a 0 .8 8 1 G 1 8 .5 0 2 1.10 0 . 72 8 0 .8 3 0 H 1 6 .4 0 1 8.40 0 . 64 5 0 .7 2 4
www.irf.com
26
IRS2109/IRS21094(S)PbF
LEADFREE PART MARKING INFORMATION
Part number
IRxxxxxx S YWW? ?XXXX
Lot Code (Prod mode - 4 digit SPN code) IR logo
Date code
Pin 1 Identifier ? P MARKING CODE Lead Free Released Non-Lead Free Released
Assembly site code Per SCOP 200-002
ORDER INFORMATION
8-Lead PDIP IRS2109PbF 8-Lead SOIC IRS2109SPbF 8-Lead SOIC Tape & Reel IRS2109STRPbF 14-Lead PDIP IRS21094PBF 14-Lead SOIC IRS21094SPbF 14-Lead SOIC Tape & Reel IRS21094STRPbF
The SOIC-8 is MSL2 qualified. The SOIC-14 is MSL3 qualified. This product has been designed and qualified for the industrial level. Qualification standards can be found at www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 Data and specifications subject to change without notice. 12/4/2006
www.irf.com
27

▲Up To Search▲

Price & Availability of IRS21094PBF

	To Download IRS21094PBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .